Vehicle Counting & Classification

<h2>Intruder Alarm System</h2>

Intruder Alarm System controller can protect up to 192 points of detection in a single system installation for maximum security. Expand the system by adding plug-and-play expansion modules anywhere and in any combination. Once installed, modules, including motion detectors, can be programmed remotely via a keypad, Upload/Download software, or via the Alarm Management Software(AMS). Most of all it support almost all alarm receiver for central alarm monitoring system(CAMS). Alarm controller system armed automatically everyday at pre-set time. Built it access control features come with all controller. Protect separate area independently under one system and  software allow complete system monitoring from PC.

Alarm CMS is the software you need to monitor alarms, for operating a Central Alarm Station. ACMS presents a complete dashboard to operators handling alarm signals along with steps and contacts to process each signal. Its  automates several tasks such as sending emails, sms and reports to subscribers. ACMS is made to add value to your Central Station by proposing services such as Web Access and Panic buttons for Smartphone’s.

SOME FEATURES:

SCALABLE, EASY INSTALLATION ,WEB FEATURES, CHOICE OF OS, ALARM ROUTING, LOAD BALANCING, PANIC BUTTON APP FOR SMARTPHONE’S, VIRTUAL PANIC BUTTON FOR PC, SMS AND EMAIL SENDING, AUTOMATIC ALARM PROCESSING, CUSTOMIZED WORKSPACE, COMPATIBLE MOST ALARM RECEIVERS, VIRTUAL RECEIVERS, IP RECEIVER

Latest, state-of-the-art Digital Central Station Alarm Receiver. Its compact design allows up to 6 telephone lines expandable to be connected to a single receiver, providing the benefit of multiple receivers in one consolidated unit. The series of interface between the security alarm system and central station receiver provides the aggregation point of all alarms.

Alarm communication devices works with alarm system controllers to provide a communication to main central alarm receiver who generate specific alarm.  The most popular communication medium are telephone line, cellular  service and ip networks, along with mobile broadband and Internet services as well as SMS services. It can be PSTN, GSM or IP device.

Once and alarm activated, Alarm controller sends signal by this communication device send signal to central receiver by data, sms or network data packets. Then main central receiver generates alarm to alert owners of their alarm status or report to Central Monitoring service providers.

Available Tranmission Device: Telephone Network -PSTN, IP Netwok, GSM Mobile Network, VPN and others.

The alarm system controller( Statring from 8-128 Zones) serves as the main brain of the Alarm Monitoring System, storing all programming, user identification and passwords while the control keypads are for users to interact with the alarm system to trigger panic alarms, arming/disarming the system, etc. Along with sensors like motion sensors, glass break detectors, panic button along with communicators via a telephone line, mobile wireless dialers, ip network and other means.

The Central Alarm Monitoring System are equipped with both receivers and Central Station software. Central Station receivers differ based on the type of communication channels they monitor - Telephone communication requires telephone line receivers while Internet communication requires Internet Protocol (IP) receivers and GSM module required where PSTN or IP network not available. These receivers listen to the communication channels, and then convert the transmission signals into alarm signal codes, which are sent to the central station software.

Parking Guidance Magnetic Sensor is designed for Outdoor wireless magnetic sensor is designed for street installation and detection of the parking space availability. The installation is easy and cost-effective. Sensors are installed in/on the asphalt or other road pavement. The sensor responds to changes in the earth's magnetic field change when a vehicle is parked above it. All ParkSol sensors have the digital signal processing (DSP), adaptive sensitivity and temperature compensation functions. The sensor transmits the parking space availability information on real-time to the PGS monitoring system and represents it on LED screens.

The remote indicator is designed for economical version and mounting on the ceiling or a cable channel and detect the availability of a parking space. It is recommended for covered parking lots. The indicator is connected to the ultrasound or magnetic sensors. The system represents the number of free parking spaces on LED screens. The indicator has reflective optics, which ensures good visibility of the parking even in a sunny day. Indications options: red/green, red/blue, only green or any customizable color and per client request.

The indicator is designed for mounting on the ceiling or a cable channel and detect the availability of a parking space. It is recommended for covered parking lots. The indicator is connected to the ultrasound or magnetic sensors. The system represents the number of free parking spaces on LED screens. The indicator has reflective optics, which ensures good visibility of the parking even in a sunny day. Indications options: red/green, red/blue, only green or any customizable color and per client request.

Space Detection Sensor with Indicator(Ultrasonic) is designed for mounting on the ceiling or a cable channel and detecting the availability of a parking space. It is recommended for covered parking lots. All sensors have the digital signal processing (DSP), adaptive sensitivity and temperature compensation functions.The sensor transmits the parking space availability information in real-time to the PGS system and monitoring.