To operate the user pulls the cord of a ceiling pull cord or to press call buttons to activate a light and sounder outside the wc and alarm information sent through network to its monitoring server. Operator acknowledge this and and take initiative according to customer requirement. Also all alarm can me exported as required.

{tab= IP Controller}IP controller usually powered by 230vac. Standby batteries are included and there is an integral battery fault monitor. The system voltage is 12vdc thus the ancillary items in toilets or other wet areas are at a safe working voltage avoiding any conflict with Part P building regulations.

- Audible & visual indication
- Mains/12vdc and battery powered versions
- Battery condition monitor
- Pull cord instructions label with braille text
- Reset button with braille text
- Selectable tones
- Built-in Backup battery

{tab= IP Module} IP Module provides TCP/IP or network connection for disabled toilet alarm system through existing IP network for alarm applications. Direct RJ45 connector can be connected to the IP module, which supports 10/100Mbps connection.

- Full control using a standard web browser
- Can operate as a Modbus/TCP slave:
- Auto-Reboot controller mode
- Power supply :9-28VDC

{tab=Ceiling Pull Unit} Ceiling Pull unit with LED incorporates a current limit resistor for use on 12vdc. Please remember that for nurse call pulls, to comply with legislation you must have 1 bangle 100mm from the floor and another bangle 800mm - 1000mm from the floor.

{tab=Reset}Wall mounting Press to Reset button with Braille text plus 2 yellow LEDs and sounder for caller reassurance. Enclosed in white ABS plastic, complete with a single gang surface mounting box. Flush fitting is also possible with a standard single gang back box.

- Mark resistant decal
- Tactile button
- Two high brightness yellow LEDs
- Integral sounder
- Back box for surface mount
- Flush mount onto 18mm standard box

{tab=O/D Strobe}Overdoor light and sounder with high brightness LEDs. The LEDs and sounder are current limited for 12vdc operation. There are separate inputs for sounder and LEDs. The single gang low profile white ABS enclosure is supplied with a surface mounting back box.

- Mark resistant decal
- Eight high brightness yellow LEDs
- Integral sounder
- Back box for surface mount
- Flush mount onto 18mm standard box

{tab=IP Software} Please contact us directly for more details for customization.
{tab=Downloads}Click to download Datasheet
{tab=Costing} Please call us at +971 04 421 9920 or email at mail (a) xtec.me

{tab=Details}
X-TEC’s Disabled toilet alarm includes everything required for a BS8300 clause compliant emergency assistance alarm. Attractively designed and simple to use, it allows a distressed person to raise an alarm in the event of an emergency. To operate, the user simply pulls the cord of a ceiling pull unit to activate a light and sounder outside the calling room.
Ideal for use in all types of disabled persons/accessible toilet applications, the Controller can also be used as a single zone emergency assistance alarm in changing rooms, solariums, accessible bedrooms, interview rooms, reception areas, etc up to a multi zone system using 4-zone controller in a row up to maximum 90-Zones.
 

{tab=Features}

• Integral power supply - requires mains power
• Monitored battery backup
• Powerful LEDs and sounder
• Option's for remote monitoring over copper / fibre / IP networks
• Two alarm modes (flashing or steady LEDs)
• Can be combined with disabled refuge EVC and other alarms
• Can be installed single zone as a single system
• Can be installed 4-zone as a single system
• Series of zone controller can be connected (90 Zone MAX)
• Alarm Indicator panel can be installed for monitoring

{tab=Architecture}

{tab=Solution Area}

• Airport
• Banking
• Campus/University
• Finance
• Commercial Office
• Government
• Health Care
• Hotels
• Industrial
• Residential
• Retail
• Shopping Mall
• Seaports
• Utilities
• And other’s

{tab=Download} Datasheet for Standard Disable Toilet Alarm
{tab=Inquiry }mail (a) xtec.me

{tab=Quick Contact} pm (a) xtec.me

{tab=Details}
X-TEC’s Disabled toilet alarm includes everything required for a BS8300 clause compliant emergency assistance alarm. Attractively designed and simple to use, it allows a distressed person to raise an alarm in the event of an emergency. To operate, the user simply pulls the cord of a ceiling pull unit to activate a light and sounder outside the calling room as well as alarm goes to central monitoring station or security room.

{tab=Feature's}

• 1024 monitoring station in a single Controller.
• Long distance connection for Alarm point(1000 Meter)
• Optional remote monitoring over copper / fiber / IP networks
• Range of ceiling pull cord and vandal resistant call button alarm activator units
• Range of beacon and sounder alarm enunciator units
• Can be combined with disabled refuge EVC and other alarms
• Interfaces for 3rd party systems
• central Software for Alarm Management.

{tab=Architecture} Please contact {/tab}

{tab=TCP/IP Networks}

{tab=Solution Area}

• Banking
• Campus/University
• Finance
• Commercial Office
• Government
• Health Care
• Hotels
• Industrial
• Residential
• Retail
• Shopping Mall
• Seaports
• Utilities
• And other’s

{tab=Download}Download Datasheet for Central Alarm System
{tab=Inquiry}mail (a) xtec.me

{tab=Details}
Being wireless, it is much easier and quicker to install than wired versions, and therefore less labor intensive and more economic.  It has applications in all kinds of public and commercial buildings, including hospitals, elderly homes, schools, universities, factories, offices, restaurants, hotels, shops, etc. The alarm is distinctive in appearance and sound, so it cannot be confused with fire alarms, and is specifically for the disabled person to gain help in an emergency.

{tab=Features}

• Basic system includes a waterproof call button with pull cord
• Waterproof reset button to cancel the alarm after rescue
• Emergency call alarm located outside the room
• Buttons waterproof to IP 65 with pull cord
• Can be monitored centrally from a security desk
• Compatible with wireless repeater to cover long distance
  

{tab=Specification}

• Wireless frequencies: 315MHz (FCC) or 433MHz (CE)
• Battery life : Button 5-10 years (non-replaceable)
• Emergency call alarm 2-3 years, (4xD type Alkaline)
• Range : approx 50M (can use with range extender)
• Button waterproof to : IP 65 with pull cord
• Low batteries indication
• Fault detect indication (supervised) (When used with a Central Monitor )
• Low maintenance, high brightness "LED" on light for long life
• Auto read in programming function on emergency call alarm
• Easy button programming using magnetic key

{tab=Architecture}

{tab=Download}Download Datasheet for Wireless Alarm

{tab=Inquiry} mail (a) xtec.me

{tab= Details}
Being IP, it is much easier and quicker to install in existing network, and therefore less labor intensive and more economic.  It has applications in all kinds of public and commercial buildings, including hospitals, elderly homes, schools, universities, factories, offices, restaurants, hotels, shops, etc. The alarm is distinctive in appearance and sound, so it cannot be confused with fire alarms, and is specifically for the disabled person to gain help in an emergency.

{tab=Features}

• Basic system includes a waterproof call button with pull cord
• Waterproof reset button to cancel the alarm after rescue
• Emergency call alarm located outside the room
• Buttons waterproof to IP 65 with pull cord
• Can be monitored centrally from a security desk
• Compatible with wireless repeater to cover long distance
  

{tab=Specifications}

Add individual toilet alarms over network
Add local toilet alarm systems over network
Local, centralized, off-site monitoring / event logs available
Makes use of existing infrastructure
Reduces cabling costs, allows retro-fitting etc.
Ideal for large buildings, campuses etc.

{tab=Architecture}

{tab=Download}Download Datasheet for IP DTAS

{tab=Software}

{tab=Inquiry} mail (a) xtec.me

{tab=Details}
Disabled Assistance Call System with Emergency Voice Communication System is a system that allows an emergency call from disabled toilets system or voice communication in either direction between a central control point and a number of other points throughout a building or building complex, particularly in an emergency situation. It has applications in all kinds of public and commercial buildings, including hospitals, elderly homes, schools, universities, factories, offices, restaurants, hotels, shops, etc. The alarm is distinctive in appearance and sound, so it cannot be confused with fire alarms, and is specifically for the disabled person to gain help in an emergency.
{tab=Features}

• Fully complies to BS5839 part 9-2011Large system capacity from 8 to 512 lines
• Distributed network saves wiring.
• System will cover Refuge, Fire Telephone and Emergency Assistance Alarm.
• Network is fully fault tolerant ,dual redundant  
• High quality brushed stainless steel finish

{tab=Specification}

The system has been designed around a total network concept so all of the FIRE-TEL panels have inbuilt networking. The system comprises 3 types of panel, such FTL-M8 touch screen master station (hereafter referred to as FTL-M8), the FTLSE-M 2 to 8 line master stations (hereafter referred to as FTLSE) and a FTL-S8 system expander panel (hereafter referred to as FTL-S8). For FIRE-TEL systems in excess of 8 lines a FTL-M8 must be used as the master station, the system can then be expanded by the use of an FTL-S8 or FTLSE in blocks of 8 lines up to a maximum system capacity of 512 lines.

{tab=Architecture}

{tab=Download}Download Datasheet for Wireless Alarm

{tab=Inquiry} mail (a) xtec.me

Kits Contains:

• 1 x NC943B 12V 140mA Call Controller c/w standby battery and relay
• 1 x NC807C Ceiling Pull Cord
• 1 x NC806CS Overdoor Light c/w Sounder
• 1 x NC809DBBT Accessible Toilet Reset Point c/w Sounder
• 1 x Accessible WC Sticker

{tab=Controller}
Single zone call controller 12V 140mA PSU and standby battery.
Capable of indicating standard and emergency calls.
Includes a volume adjustable sounder
link-selectable Call Accept/Reset button.
Power On and Alarm ‘CALLING’ LEDs.
Volt-free relay output for the optional Fire/BMS
Standby battery provides up to 24 hours standby and 15 minutes alarm running time.
- Stainless steel version also available.

{tab=Ceiling Pull Unit}
Can be used to generate a standard call.
Typically wired as a slave to an 800 Series Call Point or Reset.
Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles.
Red confidence LED and diffuser emits a bright red glow over a wide area to reassure
Surface mountable.

{tab=Reset Point}
A remote reset point sounder specifically designed for Disabled people (braille text)
On-board reassurance LED and sounder provide audible and visual indication
Mounts on a standard UK 25mm single gang flush or surface back box.
- Stainless steel version also available.

{tab=Overdoor Light Sounder}
Provides audible and visual indication of 800 Series Alarm calls outside bedrooms
Indicates Standard calls constant tone and Emergency calls pulsing tone
Dual red LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
- Stainless steel version also available.
{tab=Downloads} Click to download Datasheet
{tab=Costing} Please call us at +971 04 421 9920 or email at mail (a) xtec.me
{/tabs}
For more please contact us at any-time.

Stand-Alone Disabled Toilet Alarm

Disabled Toilet Alarm, Our complete disabled toilet alarm kits provide everything you need to install a fully-functional disabled toilet alarm. Standards Disabled Toilet Alarm is designed to meet the latest requirements and various other care standards. It is a very simple system to install and expand.  

Vandal resistant Steel, BS compliant, disabled toilet emergency assistance alarm systems for public use. The pull cord, coloured red for high-visibility, has two rings that should be positioned in specific locations – one should be only 100mm from the floor and the other should be at a height of 800-1000mm, reachable from the WC. The reset button, which has a sounder to indicate to the disabled person that assistance is on the way.

Centralized Disabled Toilet Alarm

Disabled Toilet Alarms, We can ensure the safety of disabled toilet users with our comprehensive range of disabled toilet alarms. Centralized Disabled Toilet Alarm is designed on latest technilogy to meet Multiple Alarm Monitoring with height standard and various other care standards. It can be single system for single toilets or site-wide systems with multiple monitoring stations, central control stations, BMS interfaces etc. Individual alarms can be grouped and monitored locally and/or from a central monitoring stations. All systems are battery backed for peace of mind during power outages.

Addressable Disabled Toilet Alarm

Disabled Toilet Alarm, Our range of BS8300 disabled toilet alarm systems includes a selection of waterproof products. Addressable System (ADTAS) that helps ensures help assistance centrally in any environments emergency assistance, including alarm call points, displays, ceiling pulls, Overdoor lights with strobe, LCD display for alarm, can be upgrade to central monitoring software through RS485 network to security or monitoring room. A single system support up-to 250 toilets which having built-in power backup for 48 hours nd 5 programmable BMS/Fire interface.

IP Disabled Toilet Alarm

IP disabled toilet alarm system can be expanded over large areas using network infrastructure. Our any Individual toilets can be added to the central DTA alarm monitoring system. Stand-alone toilet alarm systems with local control and monitoring can be integrated into a centralized system. Interfaces for integration with BMS and other third party systems available. Ideal for large buildings or multi-site establishments with centralized or off-site facilities management / monitoring., and has applications in hospitals, elderly homes, schools, factories, restaurants, hotels, and any other facility with where centrally monitoring requires.

Wireless Disabled Toilet Alarm

Wireless disabled call system will send an alert to gain immediate help in an emergency, and is designed to meet the worldwide need and desire to better serve disabled people. It complies with regulations devised to ensure barrier free entry and use of public facilities by the disabled, and has applications in hospitals, elderly homes, schools, factories, restaurants, hotels, and any other facility with a risk of injury in private areas.

Contact us for more information

{loadformmaker 18}