Wireless Condition Monitoring
Wireless battery powered fire, carbon monoxide, smoke, heat, manual wireless call point detection system. All detectors are works both stand-alone and can be connected to wireless gateway for central monitoring of all the alarms. We manufacture 100% EU factory of over 20 million alarms annually and ship to customers in over 120 countries worldwide.
Wireless Manual Call Point
The Wireless Manual Call Point is powered for 10 years battery an emergency device that when activated transmits a radio frequency (RF) alarm signal. This alarm signal will cause all RadioLINK alarms (in the system) to sound and thereby warn occupants of the immediate danger. The device is powered by tamperproof lithium cells designed to last the life of the product. The cell power is monitored and an end of life signal is given when the batteries are depleted. The transmissions are frequency modulated (FM) and use Manchester coding to ensure robust signal integrity and avoid signal noise interference.
Wireless Smoke Detector
The Wireless Optical Smoke Detector sensor fitted with 10 Years Battery filled with a proprietary photoelectric sensor to quickly sense low energy smoke particles. This optical Alarm is sensitive to all domestic fire types but is especially sensitive to smoldering fires. The Sensor range features a high performance optical chamber protected by a sealed mesh screen to reduce insect and dust contamination and EMC protection to reduce false alarms. In addition the sensor has an automatic dust compensation feature reducing further the risk of false alarms caused by dust build up.
Wireless Heat Detector
The Wireless Heat Detector is activated by heat from a fire, not smoke, which makes it ideal for kitchen installations and other areas where there is normally some level of smoke or fumes and where smoke Alarms may be subjected to false alarms.
The Sensor is powered by a 10 year sealed Lithium battery. The Alarm automatically monitors the battery every 40 seconds. If it is depleted it will give a short beep every 40 seconds.
Wireless Fire & CO Detector
The Wireless Fire & CO Detector is powered for life (>10 years) intuitive remote controller for RadioLINK wireless Fire and CO (Carbon Monoxide) Alarm systems. It is a completely wireless and can be wall mounted or free standing. In standby the Alarm system can be easily tested by just pressing the button. This will test and sound all the Alarms. When the system is activated the triggering Alarm can be identified (located) by simply pressing the button. Once identified it may then be silenced by pressing the button again. The Ei450 will identify the triggering Alarm and indicate if it is a fire (smoke or heat) or CO (Carbon Monoxide) Alarm by flashing the appropriate icon.