The amplifier is typically installed below counter in conjunction with an induction loop, providing a fully integrated intercom and control module, with a host of features for integration and versatile use.
{tabs type=tabs}
{tab title= Features}
- Full duplex (two-way, dual-way) communication
- Feedback and echo suppression built in
- Multiple microphone and speaker options
- Simple integration to loop amplifier
- Compact design
- All connections are on one panel for ease of installation
- Fully adjustable gain on both channels
{/tab}
{tab title=Application}
- Security window reception desks
- Customer returns points
- Banks teller & Post Office security booths
- Cash counters
- Prison visitor communication desks
- Security screens
- Bureau de Change
- Police stations
- Petrol / gasoline forecourts
- Embassies
- Public place with hi-noise
{/tab}
{tab title= Specifications} Technical specifications
Mic inputs Suitable for unbalanced electret capsules
DC bias voltage: 6V through 1kΩ
Suitable source: 1kΩ
Input impedance: 8kΩ
Input noise level: -124dBu
Speaker O/Ps <0.5% THD @ 1kHz with +11dBu (1W into 8Ω)
Bandwidth: 20Hz - 10kHz.
Min load: 4Ω, Max output level:+14dBu
Control Port LED output connects to combi mic speaker to
indicate if system is active i.e. Mute turns LED off.
PTT & Mute are active low.
+12Vdc for external module supply. 100mA fused
Staff Override Unbalanced Line I/O using 3.5mm jack socket.
Input = Tip, Output = Ring
Input sensitivity -10dBu with 1kΩ source
Output level max: +4dBu, typical -10dBu
Output Z: 220Ω
Line Output Unbalanced phono socket for connection to CLD1
line input - cable supplied.
Voltage (dc) 12Vdc, Quiescent: 170mA 2W, Maximum: 1.0A 12W
{/tab}
{tab title= Contact us} Please send your mail to mail(at)xtec.me
{/tab}
{/tabs}
XTEC
CEO & Founder