Smart Water Meter

Published in: Products
Smart Water Meter - 5.0 out of 5 based on 3 votes

Ultrasonic water meter is designed for accurate measurement of cold and hot water consumption in households, apartment buildings and commercial premises with high accuracy calculation of water consumption.

Disabled Toilet Alarm IP

Published in: Systems
Disabled Toilet Alarm IP - 5.0 out of 5 based on 101 votes

IP Disabled Toilet Alarm

IP Disabled Toilet Alarm includes everything required for ADA or BS8300 disabled act to compliant emergency assistance alarm. XTEC IP DTA system available plastic and Stainless steel version. This IP DTA design to install for 1-toilets to 250 toilets in a single network/server having options for (i) Real-time monitoring (ii) Alarm Accept (iii) Alarm MAP (iv) SMS (v) alarm pop-up (vi) Full Alarm report (xls) (vii) alarm statistic and many more. Attractively designed and easy to install and almost plug-play system as connect DTA devices, plug-in into Network and start monitoring in Alarm Monitoring software.

c-tec disabled toilet alarm

Published in: Products
c-tec disabled toilet alarm - 4.8 out of 5 based on 6 votes

C-Tec NC951 Conventional Accessible Toilet Alarm Kit to BS8300

C-Tec NC951 Kit includes everything required for ADA/BS8300 clause compliant emergency assistance alarm. Attractively designed and easy to install the NC951 allows a distressed person to raise an alarm in the event of an emergency.

Vehicle Counting & Classification Analyzer

Vehicle Counting & Classification Analyzer - 5.0 out of 5 based on 71 votes

Vehicle Counting & Classification Analyzer capable of  measure, Identify, record and monitor of vehicles speed, type, violation, tailgating, emergency stops, collusion and lots like Number of vehicles in lane, Vehicle class, Speed of vehicle, speed violation,  lane change violation, accident detection, tailgate violation, non-access lane violation, collations, illegal stops, vehicle ANPR and much more.

- Traffic Violations  - Vehicle Speeding  - Lane violation - Wrong way driving - Wrong U turns - Unsafe lane change - Vehicle tailgating - Stop sign driving

Violations

Detect road traffic violations immediately. Monitor road user’s behavior and spot problematic drivers to identify undesirable events to make traffic safer. Our VCS is a combination of a camera view and artificial intelligence to get precise data and improve traffic safety.

Counting

Vehicle Counting for total vehicle, speeding vehicle or type of vehicle as requires. Also this can be separated according to Violations.

Speeding

Detect any driver exceeding the speed limit and get automatically informed. Utilize trajectory mapping and acceleration detection to get the bigger picture. Alert the authority when needed or use the data to automatically will help spot such offenders and alert the authorities in no time.

Lane violation

Unexpected turns can jeopardize other drivers, especially when one crosses the solid lines or other prohibited areas. VCS can help you spot such violators and improve the drivers’ safety.

Tailgating

Dangerous driving too near to vehicle causes serious accident to other drivers, especially when one drive too close to another car might serious accident . VCS can help you spot such violators and improve the drivers’ safety which helps entire road safety.

Contact

Name*
E-mail:*
Message*
Word Verification:

On Line Vehicle Counting & Classification

On Line Vehicle Counting & Classification - 5.0 out of 5 based on 14 votes

Our on-line AVCS system is a free-flow dimensioning system of vehicles measuring speed, type, violation, tailgating, emergency stops, collusion velocity in a speed range up to 300km/h which can be used for traffic control, and security surveillance applications. Systems start with single to 4-Channel to 16-Channel version to monitor in real-time. Portable version also available can use fix and use less than 30-min. System is designed as server/client architecture for easy and shameless error free performance.

- Traffic Violations  - Vehicle Speeding  - Lane violation - Wrong way driving - Wrong U turns - Unsafe lane change - Vehicle tailgating - Stop sign driving

IP66 wp Hands Free Call Point

IP66 wp Hands Free Call Point - 5.0 out of 5 based on 11 votes

The stainless steel type A outstation as defined in BS5839-9:2011, and is designed to be used by the public as a disabled refuge call point. The outstation is supplied in a brushed stainless finish with a high contrast red screen print with a rugged red telephone handset behind the push door. A stainless steel bezel is available to allow the outstation to be flushed into a wall reducing the need to stock flush and surface variants.

Disabled Toilet Alarm Kit

Disabled Toilet Alarm Kit - 5.0 out of 5 based on 24 votes

The emergency assist alarm call systems within a centralized full duplex voice communication system, providing a single display point for all disabled calls within a building. When a call is made the over-door and cancel units emit a two tone siren with the “Halo” flashing, when the call is acknowledged from the EVCS controller the “Halo” on these units lights steadily and the tone double beeps every 15 seconds to reassure the caller help is on the way. As DTA system is connected to a Master Control panel the plates and cables are fully end of line monitored and battery backed as standard. DTA plates are supplied with a brushed stainless finish and a Blue HALO to aid location.

Master Controllers

Master Controllers - 5.0 out of 5 based on 24 votes

Master Controllers are bi-directional, full duplex voice communication system to assist during emergencies in high rise buildings or large sites where radio communication cannot be guaranteed to work due to interference from the fire corona. Master Controllers can accept up to eight lines of outstation, (Type A fixed phones, Type B refuge hands free points, emergency assist alarm point or jack points) as required. The touch-screen layout has four buttons allowing quick access to the main functions, and permanently displaying the number of current calls, alarms and faults.


Benefits


4.3” Full Colour Touch-screen
Integrated Assist Call with acknowledge meeting ADA/BS8300
1.5A EN54-4:A2 PSU
Full Duplex operation
Wall mount enclosure
Lockable handset cover
Expandable from 2 to 512 lines
Inbuilt networking


Technical


Controls : 3 Navigation keys, Touch-screen: 4.3” 272 x 480 x RG
Power Supply and Charger: AC input 230VAC +/- 10% 50/60Hz
Dimensions(mm) 300(W) x 350(H) x 95(D)
Weight 6.5KG / Material Stainless Steel/ Acrylic
Cables : 2x2 core 1.5mm or 2.5mm. Distance: 500m
Standards Compliance: EMC EN55103-1, EN55103-2 LVD EN60950
Product Family BS5839-pt9, BS8300, ADA


Connectivity


Connectivity can be easily and quickly integrated with an existing system that already available.

Downloads

Click to download Datasheet

Costing

Please call us at +971 04 421 9920 or email at mail (a) xtec.me

Expansion Unit

Expansion Unit - 5.0 out of 5 based on 14 votes

Expansion Controllers are bi-directional, full duplex voice communication system Allows up 8 lines to be connected. Master Controllers can accept up to eight lines of outstation, (Type A fixed phones, Type B refuge hands free points, emergency assist alarm point or jack points) as required. Allows up 8 lines to be connected. Single 12V 7AH Battery backup built-in. Enclosure mounting does not require any PCB removal.


Benefits


1.5A EN54-4:A2 PSU
Full Duplex operation
Wall mount enclosure
Lockable handset cover
Expandable up-tp 8 lines
Inbuilt networking

Technical


Power Supply and Charger: AC input 230VAC +/- 10% 50/60Hz
Dimensions(mm) 300(W) x 220(H) x 95(D)
Weight 6.5KG / Material Stainless Steel/ Acrylic
Cables : 2x2 core 1.5mm or 2.5mm. Distance: 500m
Standards Compliance: EMC EN55103-1, EN55103-2 LVD EN60950
Product Family BS5839-pt9, BS8300, ADA


Connectivity

Connectivity can be easily and quickly integrated with an existing system that already available.


Downloads

Click to download Datasheet

Costing

Please call us at +971 04 421 9920 or email at mail (a) xtec.me

Hands Free Outstations

Hands Free Outstations - 4.8 out of 5 based on 4 votes

The stainless steel hands-free type B outstation as defined in BS5839-9:2011, and is designed to be used by the public as a disabled refuge call point.Hands-free outstation is not supplied with a back- box as it can be used with any “MK” style double back-box over 25mm deep. Once the outstation is mounted the supplied sign should be placed adjacent to the outstation to give instructions and identify the point. Excellent speech pickup from microphone due to internal AGC.

  

Benefits


Braille enhanced Call Button
Stainless Steel as standard
Hands free full duplex operation
High volume ringer
Red status LEDs in Call Button
Green flashing Call Button for location
Flush or surface mount
Fully Monitored to BS5839-9:2011
Fits standard double Socket Back Box (86mm x 146mm)


Technical


Dimensions(mm) 146(W) x 86(H) x 22(D)
Weight 0.4KG / Material Stainless Steel/ Acrylic
Cables : 2x2 core 1.5mm or 2.5mm. Distance: 500m
Standards Compliance: EMC EN55103-1, EN55103-2 LVD EN60950
Product Family BS5839-pt9, BS8300, ADA


Connectivity


Connectivity can be easily and quickly integrated with an existing system that already available.


Downloads

Click to download Datasheet

Costing

Please call us at +971 04 421 9920 or email at mail(a)xtec.me
Page 15 of 63

Parking Guidance

Parking Counting

Parking Software