VOIP Disabled Toilet Alarm

Rate this item
(41 votes)
Published in: IP Disabled Toilet Alarm
VOIP Disabled Toilet Alarm - 5.0 out of 5 based on 41 votes

VOIP Disabled Toilet Alarm

Our IP Disabled Toilet Alarm System over Network Voice fully equipped with Voice over IP solutions which offer full duplex voice communication to the central monitoring for any assistance required by the users. Speech can be activated by pressing hands-free IP devices or can be automatically activated if any call buttons pressed.

To operate the user pulls the cord of a ceiling pull cord or to press call buttons to activate a light and sounder outside the wc and alarm information sent through network to its monitoring server. Voice Hands free can be activated by pressing call buttons or automatically if programmed in the system. Once  Operator monitor and acknowledge this alarm to take initiative according to customer requirement.

Wireless Disabled Toilet Alarm

Rate this item
(51 votes)
Written by Published in: Wireless Disabled Toilet Alarm
Wireless Disabled Toilet Alarm - 4.9 out of 5 based on 51 votes

Wireless Disabled Toilet Alarm System

Wireless Disabled Toilet Alarm System is fully battery or mains powered wireless devices that meets the requirements for disabled compliant acts both BS8300 and ADA. This wireless system has a mains powered controller and battery powered ancillary items which do not required any cable connection between as designed for easy & quick installation. On activation will send an alert to gain immediate help in an emergency, and is designed to meet the worldwide regulation and need and desire to better serve disabled people. The main use of public facilities by the disabled, and has applications in hospitals, elderly homes, schools, factories, restaurants, hotels, and any other facility where disabled peoples have access and required help.

Details


Being wireless, it is much easier and quicker to install than wired versions, and therefore less labor intensive and more economic.  It has applications in all kinds of public and commercial buildings, including hospitals, elderly homes, schools, universities, factories, offices, restaurants, hotels, shops, etc. The alarm is distinctive in appearance and sound, so it cannot be confused with fire alarms, and is specifically for the disabled person to gain help in an emergency.

Features

  • Basic system includes a waterproof call button with pull cord
  • Waterproof reset button to cancel the alarm after rescue
  • Emergency call alarm located outside the room
  • Buttons waterproof to IP 65 with pull cord
  • Can be monitored centrally from a security desk
  • Compatible with wireless repeater to cover long distance

Specification

  • Wireless frequencies: 315MHz (FCC) or 433MHz (CE)
  • Battery life : Button 5-10 years (non-replaceable)
  • Emergency call alarm 2-3 years, (4xD type Alkaline)
  • Range : approx 50M (can use with range extender)
  • Button waterproof to : IP 65 with pull cord
  • Low batteries indication
  • Fault detect indication (supervised) (When used with a Central Monitor )
  • Low maintenance, high brightness "LED" on light for long life
  • Auto read in programming function on emergency call alarm
  • Easy button programming using magnetic key

Download

Download Datasheet for Wireless Alarm

Email

mail (a) xtec.me

Contact us

Name*
E-mail:*
Message*
Word Verification:

IP Disabled Toilet Alarm

Rate this item
(158 votes)
Published in: IP Disabled Toilet Alarm
IP Disabled Toilet Alarm - 5.0 out of 5 based on 158 votes

IP Disabled Toilet Alarm

IP Disabled Toilet Alarm includes everything required for ADA or BS8300 disabled act to compliant emergency assistance alarm. XTEC IP DTA system available plastic and Stainless steel version. This IP DTA design to install for 1-toilets to 250 toilets in a single network/server having options for (i) Real-time monitoring (ii) Alarm Accept (iii) Alarm MAP (iv) SMS (v) alarm pop-up (vi) Full Alarm report (xls) (vii) alarm statistic and many more. Attractively designed and easy to install and almost plug-play system as connect DTA devices, plug-in into Network and start monitoring in Alarm Monitoring software.

Stand Alone Alarm

Rate this item
(34 votes)
Written by Published in: Disabled Toilet Alarm System
Stand Alone Alarm - 4.9 out of 5 based on 34 votes

Standards Disabled Toilet Alarm is designed to meet the latest requirements and various other care standards. It is a very simple system to install and expand.  

The pull cord, coloured red for high-visibility, has two rings that should be positioned in specific locations – one should be only 100mm from the floor and the other should be at a height of 800-1000mm, reachable from the WC. The reset button, which has a sounder to indicate to the disabled person that assistance is on the way.

 

Central Disabled Alarm

Rate this item
(19 votes)
Written by Published in: Disabled Toilet Alarm System
Central Disabled Alarm - 4.6 out of 5 based on 19 votes

ctec-mz-100Central Disabled Toilet Alarm is designed on latest technilogy to meet Multiple Alarm Monitoring with height standard and various other care standards. It can be single system for single toilets or site-wide systems with multiple monitoring stations, central control stations, BMS interfaces etc. Individual alarms can be grouped and monitored locally and/or from a central monitoring stations. All systems are battery backed for peace of mind during power outages.

 

Wireless Disabled Alarm

Rate this item
(17 votes)
Written by Published in: Disabled Toilet Alarm System
Wireless Disabled Alarm - 4.9 out of 5 based on 17 votes

Wireless disabled call system will send an alert to gain immediate help in an emergency, and is designed to meet the worldwide need and desire to better serve disabled people. It complies with regulations devised to ensure barrier free entry and use of public facilities by the disabled, and has applications in hospitals, elderly homes, schools, factories, restaurants, hotels, and any other facility with a risk of injury in private areas.

 

IP Disabled Alarm

Rate this item
(21 votes)
Written by Published in: Disabled Toilet Alarm System
IP Disabled Alarm - 5.0 out of 5 based on 21 votes

ip-dta-100Our IP disabled toilet alarm system can be expanded over large areas using network and internet infrastructure. Individual toilets can be added to the main toilet alarm system. Stand-alone toilet alarm systems with local control and monitoring can be integrated into a centralised system. Interfaces for integration with BMS and other third party systems available. Ideal for large buildings or multi-site establishments with centralised or off-site facilities management / monitoring., and has applications in hospitals, elderly homes, schools, factories, restaurants, hotels, and any other facility with a risk of injury in private areas.

 

Disabled Alarm with Voice

Rate this item
(12 votes)
Written by Published in: Disabled Toilet Alarm System
Disabled Alarm with Voice - 4.8 out of 5 based on 12 votes

dia-conUK market-leading disabled accessible toilet alarm system with full duplex voice contains everything you need to create a BS8300 clause compliant emergency assistance system with cost-effective disabled call system is designed to meet the demand for BS8300 and BS 5839 Part 9 compliant disabled refuge voice communication systems. System provides simple, effective two-way communication and alarm activation in these areas to assist rescue teams in determining where assistance is required and to reassure people help is on the way.

 

Disabled toilet alarm kits

Rate this item
(18 votes)
Written by Published in: Disabled Toilet Alarm System
Disabled toilet alarm kits - 4.7 out of 5 based on 18 votes

Disabled toilet alarm kits, Conventional Accessible Toilet Alarm Kit to BS8300

Disabled toilet alarm includes everything required for ADA/BS8300 clause compliant emergency assistance alarm. Attractively designed and easy to install the NC951 allows a distressed person to raise an alarm in the event of an emergency.

To operate the user pulls the cord of a ceiling pull cord to activate a light and sounder outside the WC and on the system’s call controller. A new “Call Accept” facility allows staff to send an intermittent call acknowledgement signal to the WC to confirm help is on the way.

The NC951 can be wired in to 4 core stranded security cable but can also be used as a single zone emergency assistance alarm in areas such as changing rooms, solariums, interview rooms, reception areas and more.

Disabled Toilet Alarm

Rate this item
(438 votes)
Written by Published in: Disabled Toilet Alarm
Disabled Toilet Alarm - 4.9 out of 5 based on 438 votes

disableDisabled Toilet Alarm

Disabled Toilet Alarm , This Disabled Persons Toilet Alarm is available as a single zone kit to allows a distressed person to raise an alarm in the event of an emergency. To operate, the user simply press a button or pulls the cord of a ceiling pull unit to activate a light and sounder outside the WC. Disabled Toilet Alarm can be use for central monitoring. Battery backup plus alarm running time in the even of mains failure. Available in both plastic and brushed stainless steel to suit any application from single zone to multi-zone, Conventional, Addressable and IP versions with Software monitoring.Attractively designed, easy to install and simple to use.

Alarm Monitoring