Outdoor Wireless Display
Outdoor Wireless Display
The outdoor wireless LED Display is installed in parking bay intersections inside the parking lot. The signage is assembled with high brightness modules can be fixed in pole size to be Φ50*1000mm, drive units and installing brackets. It guides drivers to find available parking spaces by receiving the output information from the wireless outdoor central controller and display the parking space information with numbers and arrows so that and every parking space is fully used and the smoothing traffic flow is ensured. The outdoor signage can be customized as single direction, dual direction and three-way direction.
Outdoor Wireless Gateway
Outdoor Wireless Gateway Controller
The outdoor central wireless controller is the core of the whole system. As the information collection and control center of the whole outdoor parking guidance system, it is responsible for collecting and processing real-time parking space status. It helps to guide vehicles to available parking spaces via the real-time updating of data and information displayed on signage. All the data for the parking guidance system, like outdoor magnetic sensors, Wireless LED display can be transferred to Central server for PGS software by LAN/WN or wirelessly as required. It can function properly as its protection grade reaches up to IP66..
Outdoor Zone Controller
Outdoor Zone Controller
Outdoor wireless zone controller communicate all magnetic parking space sensors to the central controller in real-time collection of parking status, update the wireless parking LED display zone wise. It’s designed under strict industrial standard and assembled with the international standard, which ensure its stability and reliability to resistant to water and dust with a protection level of IP66.
Wireless Magnetic Parking Detector
Wireless Magnetic Parking Detector
Wireless Magnetic Parking Detector is the main important part in the outdoor parking guidance system, the radar & magnetic parking space is produced based on the dual sensor technology. It’s is proven to carry a 99% accuracy rate in detecting both normal and vertical parking space status. The sensor is installed under the ground of every parking space and is able to work outdoors under any weather conditions. It is not only waterproof and frost-resistant, but also resists corruption, the weight of vehicles and radio interference, which achieves protection grade IP68.
Wireless Manual Call Point
Wireless Manual Call Point
The Wireless Manual Call Point is powered for 10 years battery an emergency device that when activated transmits a radio frequency (RF) alarm signal. This alarm signal will cause all RadioLINK alarms (in the system) to sound and thereby warn occupants of the immediate danger. The device is powered by tamperproof lithium cells designed to last the life of the product. The cell power is monitored and an end of life signal is given when the batteries are depleted. The transmissions are frequency modulated (FM) and use Manchester coding to ensure robust signal integrity and avoid signal noise interference.
Wireless Smoke Detector
Wireless Smoke Detector
The Wireless Optical Smoke Detector sensor fitted with 10 Years Battery filled with a proprietary photoelectric sensor to quickly sense low energy smoke particles. This optical Alarm is sensitive to all domestic fire types but is especially sensitive to smoldering fires. The Sensor range features a high performance optical chamber protected by a sealed mesh screen to reduce insect and dust contamination and EMC protection to reduce false alarms. In addition the sensor has an automatic dust compensation feature reducing further the risk of false alarms caused by dust build up.
Wireless Heat Detector
Wireless Heat Detector
The Wireless Heat Detector is activated by heat from a fire, not smoke, which makes it ideal for kitchen installations and other areas where there is normally some level of smoke or fumes and where smoke Alarms may be subjected to false alarms.
The Sensor is powered by a 10 year sealed Lithium battery. The Alarm automatically monitors the battery every 40 seconds. If it is depleted it will give a short beep every 40 seconds.
Wireless Fire & CO Detector
Wireless Fire & CO Detector
The Wireless Fire & CO Detector is powered for life (>10 years) intuitive remote controller for RadioLINK wireless Fire and CO (Carbon Monoxide) Alarm systems. It is a completely wireless and can be wall mounted or free standing. In standby the Alarm system can be easily tested by just pressing the button. This will test and sound all the Alarms. When the system is activated the triggering Alarm can be identified (located) by simply pressing the button. Once identified it may then be silenced by pressing the button again. The Ei450 will identify the triggering Alarm and indicate if it is a fire (smoke or heat) or CO (Carbon Monoxide) Alarm by flashing the appropriate icon.
Room Occupancy Detection System
Room Occupancy Detection System
Our Room Occupancy Detection System can detect and monitor the presence of people, in real time. Automatically detect occupancy in meeting rooms, offices or workspaces. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life.
Table Occupancy Detection System
Table Occupancy Detection System
Our Table Occupancy Detection System detect and monitor the presence of people, in real time. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life.