IP Master Clock System
IP Master Clock System
IP Clock System gives you piece of mind and total control. Each clock is powered by PoE or Power over Ethernet, which provides power and data over the same Ethernet cable. Each clock has the ability to receive its time from a (S)NTP time server, there is no need for a master clock.
All IP clocks within the system can be controlled independently using built-in web interface. This software allows you to monitor every feature of the IP clock system from anywhere with a network connection. No need to worry about your current system, PoE can integrate easily with existing networks..
Master Clock System Wired
Master Clock System Wired
The Synchronous Wire system is the most popular system in the Master Clock System. Clocks are run using a power circuit that acts as its time base. The clocks receive an hourly correction which synchronizes both the minute and the second hand. Every 12 hours the clock receives a daily correction to keep the clock perfectly synchronized.
The integration of the clocks into this system is effortless. Providing maximum adaptability, that clocks are capable of recognizing 59 minute correction, 58 minute correction as well as National Time/Rauland correction.The system can be powered using either 24V, 115V or 230V.